The short answer: stretching and shrinking are different processes
For fresh produce presented in trays, stretch film is the relevant starting point when the pack is made by drawing film over the product and securing it beneath the tray. Shrink film is relevant when the chosen pack requires a film enclosure that contracts under applied heat. Decide between these processes from the pack format and the product’s response to the complete wrapping process, not from the appearance of the film roll. Dingfeng’s listed stretch-film wrapper is not a shrink tunnel.
Both methods can make a close-fitting overwrap, but they reach that result differently. The table distinguishes film tension, heat shrinking and the information needed for selection. It is a process comparison, not a claim that either method automatically extends freshness or provides a sealed atmosphere.
A useful specification starts with the finished pack, rather than a film name on a quotation. Write down whether the product sits in a rigid tray, whether the film must surround the whole pack, and how the shopper should open it. Then follow the pack through filling, wrapping, labelling and handling. This separates a presentation requirement from a machine requirement. It also prevents a tray-overwrapping request from being mistaken for a shrink-wrapping request simply because both use a clear film.
| Function | Consumable | Bag type it suits | What to confirm |
|---|---|---|---|
| Stretch: draw film over a supported tray | Stretch film matched to the wrapper | Tray-supported food rather than a gathered bag | Tray dimensions, filled height, film and handling |
| Shrink: enclose the pack, then apply heat | Shrink film matched to the complete process | Enclosed packs assessed for the proposed heat stage | Product, tray and label response; enclosing and heating equipment |

Stretch film: a tray supports the product
In tray stretch wrapping, the tray carries the product while film is stretched over it and secured underneath. The support provided by the tray and the amount of product standing above its rim affect how the pack is presented. Supermarket fresh counters, central kitchens and produce packhouses are stated applications for Dingfeng’s stretch-film machine.
Review the tray outline, filled height and product stability together. A soft product, an uneven stack and a firm item may respond differently to film tension. The film also has to be suitable for the intended food contact and the machine. Confirm the film specification with the supplier instead of treating every transparent roll as a compatible wrapping material.
For tray overwrapping, include the empty tray and a representative filled tray in the assessment. The height of the food above the tray rim, sharp edges, moisture and movement during handling can all change the wrapping task. Keep labels and any absorbent components in the sample too. The point is to understand the complete pack, including what supports the food, rather than assess film against an empty container and assume the filled tray will behave the same way.

Shrink film: an enclosure followed by a heat stage
Shrink wrapping uses film intended to contract when heat is applied. The pack enclosure and the shrinking stage must be selected together. A chamber or tunnel may provide that stage, depending on the equipment. A close fit after heating does not establish whether a particular fresh product, tray or label is suitable for the process.
Review the complete sample pack, including the support, product and label. Confirm how each responds to the intended heat exposure and what finished appearance is acceptable. No shrink machine is shown in this guide: the photographs are existing Dingfeng stretch-wrapping equipment and related factory material, clearly identified below each image.
A shrink process needs its own assessment; a photograph of a stretch wrapper does not establish that capability. Discuss how the enclosure is made, where heat is applied, and whether the product, tray and label are appropriate for the proposed process. Ask the supplier to describe the equipment included and the sequence it performs. If a proposal names only a wrapping machine, clarify whether a separate heating stage is needed before treating it as a complete shrink-wrapping arrangement.

Choose the pack, then confirm the equipment
Use the finished-pack requirement as the decision point. If the task is a tray overwrap held by stretch film, review the stretch-wrapper route. If the specification requires heat shrinking, assess a shrink-film process and its heat stage. A pillow pack, a lidded tray and a stretch-wrapped tray are separate formats; changing the film alone does not convert one into another.
Before selecting equipment, list the tray or bag format, filled dimensions, product condition, film specification and available working area. Compare sample packs against presentation and handling requirements rather than assuming shelf-life or output figures. For Dingfeng’s tray-wrapping configuration, send these details with an optional photograph at the end of your inquiry. We usually reply within 12 hours.
Record the acceptance checks before discussing an order: the finished appearance, product support, label position, opening method and handling conditions. Evaluate the same representative pack against those checks so the comparison remains meaningful. Keep the result tied to the material and product assessed; changing either can call for another review. Dingfeng supplies the listed stretch-film wrapper with matching film. Send the tray format and product details when requesting a configuration, and identify any shrink requirement explicitly rather than treating it as an interchangeable setting.

