Measure the tray first

Film width is the number most buyers check last and most often get wrong. It decides how the wrap sits on the tray, how much film is wasted at the edges, and whether the pack looks the same at 9am and 5pm.

Measure the tray first, in three directions: length, width and depth. Then add the film path. Film has to travel around the tray and turn under it, so the film width must cover the tray's length plus enough to pull under both sides. A film that is too narrow will not tuck; a film that is too wide wastes material and can fold back on itself.

Our tray wrapping machine accepts film from 300 to 450 mm. That range covers the standard trays used in supermarket fresh counters for produce, meat and cooked food, where trays run roughly 100 to 280 mm long, 90 to 160 mm wide and 30 to 150 mm high.

Three checks before you order film

Three checks before ordering film:

First, the smallest tray you actually pack. A setting that suits a large tray can leave a small one with loose film. Test with your smallest, not your largest.

Second, the film's own behaviour. Two films with the same width can stretch differently. A film that stretches more gives a tighter wrap at a lower tension setting, which usually means less breakage. Ask for a sample roll and run it on the machine before committing to a pallet.

The mistakes that waste film

Third, the roll format. Our machine takes a single roll, so changing film is one movement with no splicing. If your supplier offers only double rolls, check whether the machine accepts them.

A common mistake is buying one film width for every tray. If your range is wide, two widths usually beat one compromise width, because a mid width wastes film on small trays and under-covers large ones.

Another mistake is judging the wrap by eye on a still tray. Put the pack in a chiller for an hour and look again. Film that looked tight at the counter can loosen as the tray cools, and that is what the customer sees on the shelf.

If you are unsure, send us your tray dimensions and the film you use now. We will tell you the width that fits, and whether your current film can stay.