Four checks before you position the machine

A wrapper placed badly costs more in staff time than it saves in packing time. Layout is decided once and lived with for years.

Four checks before you position the machine.

Product flow. Produce should enter the packing area once and leave once. If trays or packs travel back across the room, the layout is adding handling, not the machine.

Two layouts that work

Film and consumable access. The film roll changes several times a week. If the machine is boxed in against a wall, every change becomes a production stop. Leave access on the film side and space for a spare roll.

Clear space on the discharge side. Wrapped packs need somewhere to go: a table, a conveyor or a rotary collection table. Without it, packs stack at the machine mouth and the operator stops to sort them, which is exactly the time the machine was bought to save.

Cold chain. If the pack goes straight into a chiller, the distance and the door position matter. Long runs in warm air undo the wrap and soften produce.

What to measure

Two layout options that work in most packhouses. The first is a straight line: product, packing, wrapping, labelling, dispatch, all in one direction, with the wrapper in the middle and access from both sides. The second is a U shape around a central bench, which suits small rooms because the operator can move between tasks without walking.

One thing to measure before ordering: the distance from the packing position to the dispatch point. If it is more than a few steps, a collection table or a short conveyor is usually worth more than a faster machine.

Send us a simple plan of your packing area with dimensions, and we will suggest a position and a machine arrangement that fits it.