What to send

A trial is the cheapest part of a machine purchase and the one most often skipped. Done properly, it answers the questions a specification cannot.

What to send. A real sample of your product, in the condition it reaches the packing area. Not a perfect sample: the one that is slightly irregular, the tray that is at the end of the size range, the bag that is thinner than the rest. A machine that handles the difficult sample handles the easy ones.

What to ask the supplier to record. A video of the machine running your product, with the pack count and the time on screen. The settings used, including film tension, seal temperature and speed. The number of rejects in the run. And the film or consumable used.

Four results that decide whether it fits.

Four results that decide whether it fits

Throughput on your product, not the rated figure. If the machine runs 12 packs a minute on your tray and is rated at 15, plan for 12.

Reject rate. A machine that produces a good pack but rejects one in ten is not faster than the machine next to it.

Pack appearance after cooling. Put the sample in a chiller for an hour and look again. This is the pack your customer sees.

Changeover time between your product variants. If a shift includes three tray sizes, the time to change between them matters as much as the speed.

What to avoid

Two things to avoid. Testing with a perfect sample provided by the supplier, and accepting a video without the pack count visible. Both make every machine look good.

If a supplier cannot run a trial, ask why. Sometimes the answer is reasonable; often it means the product has not been tested on that model.

Send us your sample and the packing conditions, and we will run the trial, record the settings and send the results, including when the answer is that a different model fits better.