What each method holds

Both methods hold a bunch of leafy vegetables together. They differ in what the customer sees, what the bunch does after packing, and how much the consumable costs per bunch.

Rubber bands are cheap and fast to apply by hand. On a busy counter one person can band a bunch in a few seconds, and the band is small enough to disappear in the display. The limits appear afterwards: bands crush stems if they are tight, they split when overstretched, and a bunched pile of banded vegetables tends to loosen as it settles.

Cost and speed

Film bundling wraps the bunch with a narrow PE film that holds the leaves as well as the stems. The wrap keeps the bunch compact on the shelf, and it stops leaves from splaying out when the customer picks it up. Because the film is wider than a band, it spreads the holding force and marks the stems less.

Cost per bunch moves the other way. Film costs more per bunch than a rubber band. On high volume, the difference is real and worth calculating with your own film price and bunch count before deciding.

Two checks before choosing

Speed depends on the method and the operator. A film bundling machine rated at 1,800 cycles per hour will outpace hand banding comfortably, but only if the bunch is presented consistently. Where a store bands a few hundred bunches a day, hand banding is often enough; where a packhouse handles thousands, the machine pays back on labour alone.

Two practical checks before choosing. First, run your smallest and largest bunch through the method. Film needs the bunch to sit inside a diameter range, and a very small bunch can leave loose film. Second, look at the display after two hours. That is the comparison your customer actually makes.

We supply film bundling machines and the 30 mm dedicated film they run on. Tell us your bunch size range and daily count and we will tell you whether bundling or banding fits your counter.